Machine check exception Windows 10 при установке

How to Fix MACHINE CHECK EXCEPTION BSOD on Windows 10

In this article, You will get some practical solutions to fix machine check exception. Sometimes, This blue screen of death can hamper your works by sudden appearance. So, You should know the solutions.

This problem can come temporarily and disappear automatically. Sometimes, It may appear frequently after installing a new hardware. In that case, You must know how to tackle MACHINE_CHECK_EXCEPTION. This error also may appear with stop error code 0x0000009C or something it.

All of these codes indicate any hardware failure. This issue can occur in any versions of Windows XP, Vista, 7 or 8. Recently, Windows 10 users are getting this error. Most of them were the older PC users who upgraded from 7 or 8.

Again, Users are also getting this error after installing major updates Fall Creator Update or April Update 2018 etc.

Reasons Behind this Error

Basically, this blue screen of death is the result hardware fault, overclocking, overheating and misconfiguration of any hardware. When your computer fails to load or recognize any installed hardware, It may show you the BSOD error machine check exception. Anyway, Here are the main things that cause this error –

• Problematic or incorrectly configure Drivers.
• Missing or problematic system files.
• Security software.
• Problematic CPU fans.

There may be other things that may cause this problem.

How to Fix MACHINE CHECK EXCEPTION

When you want to solve this blue screen error, You should try to find out the reasons behind it. Also, You should check if this problem started appearing after the recent changes in your PC hardware or operating system or not. You also should remember how old is your PC and how often you clean it. Anyway, Here are the fixes for machine check exception BSOD.

1. Remove Recently Installed Drivers or Software or Hardware

Most of the time, Blue screen error comes suddenly. It is because of recent changes that you have made on your PC. Try to remember what you have done and when you started to face this error. Then uninstall any drivers, software from your PC that you have installed recently. If you have added a new hardware, You can disconnect it and run PC. Then see, If you still face machine check exception.

2. Check CPU and Power Supply Fans:

Sometimes, Your PC or laptops fans may be stuck due to dust. In that case, Your PC may become overheated. Then, Any user may face this BSOD. In that case, You can open your CPU and then switch the power button ON and see if the fans are OK. Sometimes, You may find that fans are very slow or stuck. In that case, You will need to clean them or replace with new one. After doing it, You should not face “MACHINE CHECK EXCEPTION” again.

3. Update Windows & Drivers:

Another great way to resolve this problem is updating all of your drivers. You also should update windows. Sometimes, Outdated drivers that are not compatible with the latest build of your operating system can cause blue screen stop errors. In that case, Updating drivers can fix this problem. Here is a guide on how to update drivers.

4. Safe Mode:

When your PC opens, It loads so many services including third-party during startup. Sometimes, That may cause any conflict. As a result, You may encounter any problem BSOD. Safe mode is a way that disables everything except some builtin basic services. It helps to troubleshoot many problems on your PC.

This is the method for the users who can’t access their PC for Machine Check Exception error. You can boot into safe mood and remove recently installed drivers, programs or windows update. To boot into safe mode when you can’t access windows, Follow alternative method 2 and 4 from this article.

If you need to update drivers, You can boot into safe mode with networking.

5. Troubleshoot by Creating Small Minidump:

You can take as an ultimate method. When your PC experience any BSOD errors, It can store all related date of it in a dump file. By analyzing it, You can find out the root reasons for this error. You can read: Create and Configure Small Minidmup File

In that article, I’ve described how you can create blue screen dump file and view it. You will definitely find the problematic drivers that caused the BSOD in your PC. It will help you to fix the problem. Just, Update / Reinstall these drivers with latest version or post the driver names in microsoft forum. I hope, It will help you.

6. System Restore:

If you think that these are not working. You can try system restore. It will transfer your PC’s environment in a previous stage when you had not faced this problem. It it doesn’t work, You can consider refreshing windows.

7. Update BIOS

To fix machine check exception, you also may need to update BIOS. For many users, it has worked surprisingly.

8. Fix Machine_Check_Exception While Running Virtualization Software

Some users have reported that they face this BSOD only when you they try to run virtual desktop type software. It may happen due to memory problems or BIOS problems. In that case, Above solutions can help you. But, Additionally, You can follow these things:

• Diagnose and Fix RAM Problems.
• Update BIOS. Updating it is a critical thing. You have to do it carefully. All of the instructions you will find in your PC manufacturer website.

I hope, This information will help you. I will be happy If you have any better working solution. You can share it by the comment.

Источник: https://www.xtremerain.com/fix-machine-check-exception/

Fix MACHINE CHECK EXCEPTION BSOD on Windows 10

MACHINE_CHECK_EXCEPTION blue screen error has a bug code 0x0000009C. This error occurs in upgrading Window 10, playing game and other conditions. Following the below solutions to fix it so that the Windows 10 can run smoothly.

Solutions:

1: Enter Safe Mode

2: Startup Repair the Machine Check Exception BSOD

3: Update Hardware Devices Drivers

4: Run BSOD Troubleshooter

5: Disable Overclock

6: Update BIOS to the Latest Version

7: Check Hardware Devices

Solution 1: Enter Safe Mode

If the Machine Check Exception BSOD is pops in a loop when you reboot your computer, you can do nothing because you cannot login the desktop. So maybe you should enter the safe mode.

In the safe mode, you can do something to rescue your system.

Solution 2: Startup Repair the Machine Check Exception BSOD

The Startup Repair way may fix the MACHINE_CHECK_EXCEPTION error by recovery all the corrupt system files, missing/incompatible driver files, corrupt boot configuration settings, corrupt registry settings, etc. And following steps is how to use it.

1. Hard reboot your computer 2-3 times until it shows Automatic Repair.

2. Choose Advanced options.

3. In advanced options, choose Startup repair.

4. After that, Windows 10 will diagnose the problem.

If your Startup repair cannot work, you need to create a USB bootable device and set to reboot from USB devices in BIOS to use the Startup repair function.

Solution 3: Update Hardware Devices Drivers

The MACHINE_CHECK_EXCEPTION BSOD may be caused by the incompatible or malfunctioning hardware drivers, so you can try to fix it by updating drivers. And someone reported that this only happens when playing games, so update the graphics driver is necessary.

For updating drivers to the latest version, you can go to the desktop or laptop officiate site to find the drivers and download it one by one, then install them to up-to-date. Because you need to update all the drivers, so it will takes some time.

Of course, if you have does not good at it, you can try to use Driver Booster to help you. This will be an easier and faster way.

Driver Booster will help you download and update all the drivers with three steps. It will scan all your hardware device drivers, told you how many drivers are missing and outdated, and then find the latest drivers for them.

1. You can Download Driver Booster, install and run it on your Windows 10 system.

2. Click Scan. After that, Driver Booster will scan all the devices and find the faulty, missing and outdated drivers.

3. Click Update Now. Select all the drivers, and update them by one click.

Solution 4: Troubleshoot Blue Screen of Death Error

When the MACHINE_CHECK_EXCEPTION occurs, you can try to fix it by the Windows built-in desktop application BSOD troubleshooter to fix it.

1. Type Troubleshooter in search box to enter the troubleshoot center.

2. Scroll down the vertical scroll bar to find the Blue Screen.

3. Click it to choose Run the TroubleShooter.

After that, Windows will detect the blue screen error which will causes Windows to stop or restart issues and then fix it automatically.

Solution 5: Disable Overclock

Sometimes, in order to get the high game performance, you set overclocking for your GPU. It may causes the Machine check exception BSOD when playing games. So disable overclock is necessary.

1. Reboot your computer and Press F2 or DEL to enter the BIOS settings.

2. Use the arrow keyboard to locate at Advanced tab.

3. Find the Performance >Overclock.

4. Then Disable it.

5. Save settings and Press F10, then click Yes to save these changes.

Solution 6: Update BIOS to the Latest Version

BIOS not only helps to run the system but also keeps the system security. If your BIOS is an older version, it may causes the MACHINE_CHECK_EXCEPTION Blue Screen of Death.

You should go to the computer manufacturer’s website download center to find out the BIOS download package, download and update it manually.

Solution 7: Check Hardware Devices

Many hardware devices will causes this error, such as the RAM, hard drive, power supply. Running the SFC and DISM to check the system and hard drive error. Using the Windows Memory Diagnostic tool to test the RAM.

So you should to disconnect anything not required to run the system. And see if the computer still freezes, if it does, there is one or more components is faulty. Changing the error hardware to fix MACHINE_CHECK_EXCEPTION error.

Related Articles:

Fix KMODE_EXCEPTION_NOT_HANDLED BSOD ON Windows 10

Fix DRIVER_VERIFIER_DETECTED_VIOLATION BSOD Windows 10

Solved: Whea Uncorrectable Error BSOD Windows 10

Источник: https://windows10skill.com/fix-machine_check_exception-bsod-on-windows-10/

Full Fix: MACHINE CHECK EXCEPTION error in Windows 10

Blue Screen of Death errors, also known as STOP errors, are one of the most serious errors on Windows 10. These types of errors can be caused by faulty hardware, therefore it’s crucial to know how to fix errors such as MACHINE CHECK EXCEPTION.

MACHINE CHECK EXCEPTION can cause many problems on your PC. Speaking of this error, users reported the following issues as well:

• Machine Check Exception blue screen – This error is always followed by a Blue Screen of Death. The most ly cause is a hardware problem or a corrupted driver.
• Machine Check Exception on boot – Sometimes this error appears as soon as your PC boots. As a result, you won’t be able to access Windows 10 at all.
• Machine Check Exception overclock – Many users tend to overclock their hardware in order to get the maximum performance. However, overclocking can cause this and many other errors to occur.
• Machine Check Exception Windows 10 install – Few users reported this issue as soon as they installed Windows 10. According to them, the issue was caused by incompatible hardware or a bad driver.
• Windows 10 upgrade machine_check_exception – This error also appears after upgrading your Windows 10 PC. Usually the problem is a bad update or a compatibility issue.
• Machine Check Exception error System halted – This is a variation of this error, but you should be able to fix it with solutions from this article.
• Machine Check Exception Internal timer error – Another variation of the original error. Just with other errors, this one can be solved with one of our solutions.
• Uncorrectable Machine Check Exception – This is also a type of error that can appear. In most cases, the error is caused by a hardware issue.
• Machine_check_exception hal.dll, halmacpi.dll – Sometimes this error will tell you which file is causing the problem. The most common causes for this error are hal.dll and halmacpi.dll.

Fix – MACHINE CHECK EXCEPTION error in Windows 10

Solution 1 – Update your drivers

Blue Screen of Death errors are often caused by incompatible or outdated drivers, therefore it’s crucial that you update drivers as often as you can. In order for Windows 10 to recognize and use your hardware, your drivers have to be up to date, and if that’s not the case, your PC will crash while giving you the MACHINE CHECK EXCEPTION error.

Easiest way to fix this issue is to update your drivers, and you can download all the necessary drivers from your hardware manufacturer’s website. Users confirmed that updating their drivers fixed the problem for them, so be sure to try that.

Update drivers automatically

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically. Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.

Here is a quick guide on how to use it:

1. Download and install TweakBit Driver Updater
2. Once installed, the program will start scanning your PC for outdated drivers automatically. Driver Updater will check your installed driver versions against its cloud database of the latest versions and recommend proper updates. All you need to do is wait for the scan to complete.
3. Upon scan completion, you get a report on all problem drivers found on your PC. Review the list and see if you want to update each driver individually or all at once. To update one driver at a time, click the ‘Update driver’ link next to the driver name. Or simply click the ‘Update all’ button at the bottom to automatically install all recommended updates.

   Note: Some drivers need to be installed in multiple steps so you will have to hit the ‘Update’ button several times until all of its components are installed.

Solution 2 – Run the BSOD Troubleshooter 

The next thing we’re going to try here is running Windows 10‘s built-in troubleshooting tool. This tool can be used for dealing with all sorts of issues, including the BSOD problems. So, it could be useful when dealing with the MACHINE CHECK EXCEPTION error, as well.

Here’s how to run Windows 10‘s troubleshooting tool:

1. Open the Settings app and go to Update & Security section.
2. Select Troubleshoot from the menu on the left.
3. Select BSOD from the right pane and click Run the troubleshooter.
4. Follow the instructions on the screen to complete the troubleshooter.

Solution 3 – Run the SFC scan

The next troubleshooter we’re going to try is running the SFC scan. This is a command-line tool that repairs corrupt system files, which can resolve BSOD issues.

Here’s how to run the SFC scan in Windows 10:

1. Right-click the Start Menu button, and open Command Prompt (Admin).
2. Enter the following line and press Enter: sfc/scannow
3. Wait until the process is done (it may take a while).
4. If the solution is found, it will automatically be applied.
5. Now, close the Command Prompt and restart your computer.

Solution 4 – Run DISM

And the third command-line troubleshooting tool we’re going to try here is DISM. Deployment Image Servicing and Management (DISM), as its name says, re-deploys the system image, which can lead to resolving BSOD issues,  MACHINE CHECK EXCEPTION.

We’ll walk you through both standard and the procedure that utilizes the installation media below:

1. Right-click Start and open Command Prompt (Admin).
2. Paste the following command and press Enter:
   • • DISM /Online /Cleanup-Image /RestoreHealth
3. Wait until the scan is finished.
4. Restart your computer and try updating again.

• With the Windows installation media

1. Insert your Windows installation media.
2. Right-click the Start menu and, from the menu, choose the Command Prompt (Admin).
3. In the command line, type the following commands and press Enter after each:
   • dism /online /cleanup-image /scanhealth
   • dism /online /cleanup-image /restorehealth
4. Now, type the following command and press Enter:
   • DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
5. Make sure to change an X value with the letter of the mounted drive with Windows 10 installation.
6. After the procedure is finished, restart your computer.

Solution 5 – Check the hard drive

If there’s something wrong with your hard drive, BSOD issues are to be expected. So, go ahead an run the chkdsk command in order to scan your hard drive, and fix potential issues.

Here’s how to run the chkdsk command in Windows 10:

1. Enter the Advanced Startup (Restart your computer while holding the Shift key).
2. Choose Troubleshoot > Advanced Options.
3. Select Command Prompt from the list of options.
4. When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:
   • bootrec.exe /rebuildbcd
   • bootrec.exe /fixmbr
   • bootrec.exe /fixboot
5. Some users are also suggesting that you need to run additional chkdsk commands as well. To perform these commands, you need to know drive letters for all your hard drive partitions. In Command Prompt you should enter the following (but remember to use the letters that match your hard drive partitions on your PC):
   • chkdsk /r c:
   • chkdsk /r d:

   This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

6. Restart your computer and check if the issue is resolved.

Solution 6 – Uninstall your graphics card driver

Although it’s recommended to use the latest drivers, sometimes latest drivers might have certain issues with Windows 10, and it’s recommend to uninstall them and replace them with the older version. To uninstall your graphic card driver, do the following:

After removing the display driver you just have to visit your graphic card manufacturer’s website and download the drivers for your graphic card. Just be sure to download the older version of the drivers and not the one you had before. Although this solutions applies to Nvidia graphic cards, it might also work for AMD owners as well.

Solution 7 – Update your BIOS

According to the users, MACHINE CHECK EXCEPTION error can be caused by outdated BIOS, and if you want to fix this error, you might have to update your BIOS. By updating your BIOS you’ll enable new features of your motherboard and fix the potential compatibility issues between your processor and motherboard.

Bear in mind that updating BIOS is an advanced procedure, and if you don’t perform it correctly you can cause permanent damage to your PC. If you decide to update BIOS, be extra careful and check your motherboard manual for detailed instructions.

Solution 8 – Disable Fast Boot and CSM in BIOS

Many users reported that disabling Fast Boot and CSM in BIOS fixed the MACHINE CHECK EXCEPTION Blue Screen of Death error on Windows 10, therefore we strongly advise you to disable these features from BIOS. To see how to access BIOS and how to disable these features, be sure to check your motherboard manual for detailed instructions.

• READ ALSO: Fix: Critical Service Failed BSoD Error in Windows 10

Solution 9 – Disable Intel SpeedStep Technology in BIOS

Few users reported that disabling Intel SpeedStep Technology in BIOS fixes this issue, so you might want to try that. Before you enter BIOS, make sure that you check your motherboard manual for detailed instructions on how to enter BIOS and how to disable this feature.

Solution 10 – Disable your LAN adapter

According to users, the MACHINE CHECK EXCEPTION error is caused by your Atheros network adapter, and in order to fix this issue it’s advised that you disable your network adapter. To do that, just follow these steps:

1. Press Windows Key + X to open Power User Menu and select Device Manager from the list.
2. When Device Manager opens, locate your network adapter, right click it and choose Disable from the menu.
3. Restart your computer and check if the problem is resolved.

If the problem is fixed, you might want to try updating your network adapter driver and enabling the adapter again, but if that doesn’t help, you should replace your network adapter since it might be faulty.

Solution 11 – Set SATA Fast boot to All devices

Some users claim that setting SATA Fast boot to All devices in BIOS fixes the MACHINE CHECK EXCEPTION BSoD error. To see how to change this setting, we strongly advise you to check your motherboard manual for detailed instructions.

Solution 12 – Unplug your DVD and additional hard drives

Users reported that they are unable to install Windows 10 due to MACHINE CHECK EXCEPTION error, and if you’re facing the same issue, try to disconnect your DVD drive along with any additional hard drives that you have installed.

Solution 13 – Check for faulty hardware

Blue Screen of Death errors such as MACHINE CHECK EXCEPTION can be caused by faulty hardware, therefore we strongly advise you to check your RAM, processor, motherboard and all other major hardware components. Few users reported that a faulty processor is the cause for this error, so make sure that you check your processor first.

MACHINE CHECK EXCEPTION BSoD error can cause certain problems, but this error can be easily fixed by performing a BIOS update, or by changing certain BIOS settings.

Editor’s Note: This post was originally published in June 2016 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.

READ ALSO:

Источник: https://windowsreport.com/machine_check_exception-windows-10/

Fix MACHINE_CHECK_EXCEPTION BSOD error On Windows 10

Windows 10 frequently restart with MACHINE_CHECK_EXCEPTION BSOD error after installing latest updates? Or due to this Windows 10 BSOD loop system fails to start normally? The MACHINE_CHECK_EXCEPTION bug check value 0x0000009C indicates that a fatal machine check exception has occurred, because of driver incompatibility between windows and hardware device. Also corrupted system files, hardware failure or memory problem cause this MACHINE_CHECK_EXCEPTION BSOD.

Machine_check_exception windows 10

If you are also struggling from this Windows 10 BSOD, here some effective solutions to fix machine_check_exception on windows 10.

First of all Disconnect all external devices, and restart windows. Check if this helps start windows normally.

If due to this BSOD loop, System restarts frequently, then we need a windows installation media to access advanced options and perform Startup repair. That scan and fix problems prevent windows start normally. In case if you don’t have check how to create windows 10 Bootable media from here.

1. Insert the installation DVD or USBand boot Windows 10 from it.
2. In the ‘Windows Setup’page, select the‘language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
3. Click on ‘Repair your computer’ and select ‘Troubleshoot’.
4. Click on ‘Advanced options’ and select ‘Automatic Repair’ and select the operating system.

Note: You might also require to change the boot priority in BIOS in order to allow the computer to boot from CD/DVD.

Important: While scanning the hard drive if any bad sectors are found, the scanner tries to repair that sector, any data available on that might be lost.

Boot into Safe mode

If startup repair fails to fix the problem, then boot into safe mode starts Windows in a basic state, using a limited set of files and drivers. It can help you troubleshoot problems on your PC.  Let’s start Start your PC in safe mode with networking and apply troubleshooting steps below to get rid of this Windows 10 Blue screen machine check exception.

Update the Display driver

Now when your PC start on safe mode, the first thing you have to do, update or reinstall the display driver.

• Press Windows + X select device manager,
• expand Display adapters.
• Right-click the display driver and click Update Driver Software.
• Select Search Automatically for Updated Driver Software.
• Follow on screen instructions to let windows check for and install the latest driver software.

Reinstall Display Driver

If the issue persists, I would suggest you to uninstall and reinstall the Display driver.  To do this

• Open Device Manager.
• Expand Display adapters.
• Right-click the display card driver and click Uninstall.
• Windows will prompt you to confirm the device’s removal. Click OK to remove the driver.
• After the un-installation is complete, reboot your computer as soon as possible.
• The computer will load the generic display drivers.

Or go to the manufacturer’s website, download and install the compatible display card drivers for your computer and check.

Also  try installing the drivers in compatibility mode and check if that helps.

To install the drivers in compatibility mode:

• Right click on the setup file of the driver and select Properties
• Select Compatibility Tab
• Place a check mark next to Run this program in Compatibility mode and select the operating system accordingly from the drop down list
• Let the driver to install and then check the functionality.

Restart windows and check if windows start normally without any BSOD error.

Disable fast boot windows 10

• Open control panel,
• Search for and select “Power options”.
• Click “Choose what the power buttons do” on the left side of the window.
• Click “Change settings that are currently unavailable.”
• Under “Shutdown settings” make sure “Turn on fast startup” is unchecked.

Check for system file corruption

Corrupted, missing system files also, especially after Windows 10 upgrade mostly causes different blue screen at startup. Run DISM RestoreHealth command and system file checker utility that scan and restore missing files with correct one.

• To do this open command prompt as administrator,
• type DISM command and hit enter key : DISM.exe /Online /Cleanup-image /Restorehealth
• Wait for 100% complete the scanning process,
• After that run, SFC utility command sfc /scannow press enter key.
• This will scan System for missing files, and restore them with correct ones from %WinDir%\System32\dllcache
• Restart windows after complete the scanning process, check there is no more BSOD at startup.

Check CPU and Power Supply Fans

Sometimes, Your PC or laptops fans may be stuck due to dust. In that case, Your PC may become overheated. Then, Any user may face this BSOD. In that case, You can open your CPU and then switch the power button ON and see if the fans are OK. Sometimes, You may find that fans are very slow or stuck. In that case, You will need to clean them or replace with new one. After doing it, You should not face “MACHINE CHECK EXCEPTION” again.

Clean RAM Or Graphic Card slots

Also Some Times Due to Dust on RAM and Graphic Card slots you may face No Screen or Different Blue Screen Errors on your windows computer. As Hardware Troubleshooting part we strongly suggest to remove Installed RAM, Graphic Card ( if installed ) and clean the slots with a soft cloth and attach the memory / Graphic as it is. Also, Check SATA Cable And Power Cable Is attached properly on Hard Disk Drive.

This error can also be caused by an overloaded internal or external power supply, in which case the solution to the problem would be to upgrade the power supply that is being overloaded.

After performing above Steps now Close your Computer Cabinet Attach only power cable, VGA cable with keyboard & mouse Lets Turn on your Computer Started Normally.

Did these solutions help to fix machine_check_exception windows 10? Let us know on comments below, also read:

report this ad

Источник: https://windows101tricks.com/fix-machine-check-exception-error/

How to Fix the Machine Check Exception BSOD in Windows 10

Advertisement

A Machine Check Exception is a critical Windows system error. The result? A blue screen of death. Unfortunately, a Machine Check Exception error isn’t usually a one-off. Some users report being plagued by Machine Check Exception errors, having to trial a long list of potential fixes before arriving at the promised land.

This article gathers those fixes that are found to work and compiles them in a nice list. Here’s how you fix your Machine Check Exception error for good.

What Is a Machine Check Exception Error?

A Machine Check Exception (MCE) is typically a fault relating to your system hardware. Unfortunately, the resulting stop codes don’t always provide a clear picture as to what is wrong.

The Windows Hardware Error Architecture (WHEA) does its best to pinpoint where the error is, but even the WHEA can have its own failures How to Fix the WHEA Uncorrectable Error on Windows 10 How to Fix the WHEA Uncorrectable Error on Windows 10 Some Windows crash errors are more cryptic and therefore more difficult to troubleshoot. The WHEA Uncorrectable Error is one of those. Read More .

Still, you can boil an MCE error down to a few base causes:

• System errors relating to hardware
• Issues and overstress due to overclocking
• Memory related issues
• Physical hardware issues
• date or corrupt drivers

That’s quite the range, isn’t it? Machine Check Errors can come from almost anywhere because they deal with hardware and almost everything else. Not to worry; read on to fix your Machine Check Exception error.

1. Update Drivers

One of the most common Machine Check Exception error fixes is updating outdated system drivers. Outdated drivers are becoming rarer on Windows 10 machines as Microsoft automatically handles driver updates. However, that doesn’t mean outdated drivers cannot and will not happen. Windows 10 lists the drivers it updates in the Update & Security section of the Settings panel.

Press Windows Key + I to open the Settings panel, then select Update & Security> View update history. You can find any driver updates here. Now, type device manager in the Start menu search bar and select the best match. Head down the list and check for an error symbol. If there is nothing, your driver status is ly not the source of the issue.

Check out this list of free tools you can use to fix the majority of Windows problems The Best Free Windows 10 Repair Tools to Fix Any Problem The Best Free Windows 10 Repair Tools to Fix Any Problem If you're running into system problems or rogue settings, you should use these free Windows 10 repair tools to fix your PC. Read More . The first two options—IOBit’s Driver Booster and Snappy Driver Installer—do exactly this.

2. Physical Hardware Check

Next up, perform a quick physical hardware check. Is all your RAM seated properly? Is your CPU heatsink in place? Has your GPU shifted place? A Machine Check Exception error closely relates to your system hardware. Have you installed a new component or switched some hardware around?

And, while you’re inside your case, give it a little clean. That means removing dust and buildup from your fans. If you have some compressed air, give your fans a little toot, as well as your GPU fans. Otherwise, some good old deep breaths and powerful blows have a similar effect (albeit less effective).

Overclocking is another strain on system hardware. Done correctly, you squeeze some extra performance from your system hardware. Overclocking has never been easier too. There are countless guides for almost every bit of hardware and online forums are full of other users overclocking experiences.

Overclocking, however, does place additional strain on your hardware—even if it is within the reasonable confines of the advertised hardware limits. Resetting any overclocking may help clear your Machine Check Exception errors.

Chances are, you need to enter your system BIOS or UEFI menu. To do this, turn off your system. Next, turn your system back on, pressing your BIOS/UEFI menu access key (usually F2, but other common keys include F1, F10, DEL, and ESC How to Enter the BIOS on Windows 10 (And Older Versions) How to Enter the BIOS on Windows 10 (And Older Versions) To get into the BIOS, you usually press a specific key at the right time. Here's how to enter the BIOS on Windows 10. Read More ).

BIOS and UEFI settings vary by manufacturer, but menu titles are usually similar. You are looking for an Overclocking option. For the most part, overclocking options are found under the Advanced, Performance, Frequency, or Voltage menu.

Find the menu and reset your overclocking options. Resetting will return your system to its out-of-box state—but could also remove the Machine Check Exception error in the process.

Reset Your BIOS/UEFI Settings

If clearing your BIOS/UEFI overlock settings doesn’t solve the problem, try resetting your entire BIOS. Somewhere amongst the BIOS menu, there is an option to complete a full BIOS settings reset. Find the option and select it.

4. Run CHKDSK

Windows Check Disk is an integrated Windows utility that you run from the Command Prompt 7 Nifty CHKDSK Features to Use in Windows 10 7 Nifty CHKDSK Features to Use in Windows 10 CHKDSK («check disk») is a Windows diagnostic tool that scans data drive volumes, verifies their integrity, and fixes errors when necessary. Here we highlight the improved CHKDSK features you can find in Windows 8 and… Read More . CHKDSK verifies your system files and fixes any issues along the way.

Type command prompt in your Start menu search bar, then right-click the best match and select Run as administrator. (Alternatively, press Windows key + X, then select Command Prompt (Admin) from the menu.)

Next, type chkdsk /r and press Enter. The command will scan your system for errors and fix any issues along the way.

5. Run SFC

Next up, run the System File Check (SFC).

SFC is another Windows system tool How to Fix Corrupted Windows System Files With One Command How to Fix Corrupted Windows System Files With One Command If you're seeing weird issues in Windows, it could be due to system files becoming corrupted.

Here's how to fix them using the System File Checker. Read More that checks for missing and corrupt files. Sounds CHKDSK, right? Well, SFC checks for Windows system files specifically, while CHKDSK scans your entire drive for errors.

But before running the SFC command, it is best to double-check that it is completely functional.

DISM stands for Deployment Image Servicing and Management. DISM is an integrated Windows utility with a vast range of functions. In this case, the DISM Restorehealth command ensures that our next fix will work properly. Work through the following steps.

1. Type Command Prompt (Admin) in the Start menu search bar, then right-click and select Run as administrator to open an elevated Command Prompt.
2. Type the following command and press Enter: DISM /online /cleanup-image /restorehealth
3. Wait for the command to complete. The process can take up to 20 minutes depending on your system health. The process seems stuck at certain times, but wait for it to complete.
4. When the process completes, type sfc /scannow and press Enter.

Check out the following video. The video offers fixes for the Windows System Service Exception error, but the section for the CHKDSK and SFC scans are the same.

6. Check Your RAM Using MemTest86

MemTest86 is a free, standalone memory testing tool for x86 machines How to Safely Stress Test Your (Overclocked) CPU, GPU, and RAM How to Safely Stress Test Your (Overclocked) CPU, GPU, and RAM Stress tests can reveal whether or not your system remains stable under heavy loads, particularly if you overclocked your hardware. We show you how stress tests work and pitfalls to look out for. Read More . You boot MemTest86 from a USB flash drive (or bootable disc) and leave it to check your system RAM. Now, a MemTest86 RAM check takes a long time to complete; a single pass takes hours depending on the amount of RAM you have installed.

To get the full MemTest86 experience you should run at least two passes (that’s two complete cycles). However, by most reports, MemTest86 should expose a serious RAM issue after a short amount of time.

Head to the MemTest86 download page and download the Image for creating bootable CD (ISO format). Next, you need to write the MemTest86 ISO to a USB flash drive. Check out this list of ten free tools to make a bootable USB flash drive Create a Bootable USB From an ISO With These 10 Tools Create a Bootable USB From an ISO With These 10 Tools Want to create a bootable USB drive from an ISO file? We've got the ten best bootable USB drive creators around. Read More .

If it does return RAM errors, complete an Internet search for the error code and type to discover your next course of action.

7. Last Resort: Reset Windows 10

If nothing else works, you can use the Windows 10 Reset function to refresh your system The One Reason to Reset or Refresh Windows 10: Clutter The One Reason to Reset or Refresh Windows 10: Clutter When Windows 10 feels sluggish, you can blame various forms of clutter. You can get Windows up to speed by using Reset or Refresh it. We explain the difference and how to use it. Read More files.

Windows 10 Reset replaces your system files 4 Ways to Reset Windows 10 and Reinstall From Scratch 4 Ways to Reset Windows 10 and Reinstall From Scratch Windows 10 is still Windows, meaning it will need a fresh start every once in a while. We show you how you can get a fresh Windows 10 installation with as little effort as possible.

Read More with a completely fresh set of files and will theoretically clear any lingering issues relating to your Machine Check Exception error while keeping the majority of your important files intact.

Head to Settings > Update and Security > Recovery, then under Reset this PC select Get started. Your system restarts as soon as you hit the button, so make sure you back up any important files beforehand. Your system will restart, then you may select Keep my files or Remove everything.

Machine Check Exception Error Eradicated!

You can now consign your Machine Check Exception error to the history books. MCE errors are never nice to deal with as they can stem from any part of your system hardware. The above fixes will find the root of your MCE issue and finally eradicate it from your system.

For more specific troubleshooting, check out our guide to fixing the “video scheduler internal error” issue Video Scheduler Internal Error: 8 Fixes for This Windows 10 Stop Code Video Scheduler Internal Error: 8 Fixes for This Windows 10 Stop Code Met the cryptic Windows 10 stop code «VIDEO SCHEDULER INTERNAL ERROR»? These potential fixes may solve it for you. Read More .

Источник: https://www.makeuseof.com/tag/fix-machine-check-exception-bsod-windows-10/